Справочник Пользователя для Lucent Technologies Release 8.2

Скачать
Страница из 524
Networking Screens 
247
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
A  
Screens Reference
IP Interfaces 
Use the IP Interfaces screen to define an interface to the LAN from either the C-LAN 
or MedPro circuit packs. The physical interface is port 17 on the C-LAN board and is 
a network interface card on the MedPro. This screen specifies the IP address (via the 
Node Names screen), subnet mask, default gateway address, and the network region 
for each IP interface on the local DEFINITY ECS.
Note:
The C-LAN and MedPro circuit packs must be administered on the 
Circuit Packs screen before they can be administered on this screen.
Inter-region IP 
connectivity allowed?
Specifies whether or not IP endpoints registered in one region can use media 
processing resources (MedPro) in another region.
change ip-interfaces                                            Page   1 of   2 
                                                                                
IP Interfaces
Inter-region IP connectivity allowed?  n
Enable 
Net
Eth Pt Type   Slot  Code Sfx Node Name
 
Subnet Mask 
Gateway Addr
Rgn
y   C-LAN  01A10 TN799 B  clan-a1 
  255.255.255.0   192.168.10 .100 1
   y 
MEDPRO 01A13 TN802 B  med-a1 
 
255.255.255.0   192.168.10 .100 1
MEDPRO 01A16 TN802 B  med-a2 
  255.255.255.0   192.168.20 .100 1
y   C-LAN  01A09 TN799 B  clan-a2 
 
255.255.255.0   192.168.10 .100 2
   y 
MEDPRO 01B13 TN802 B  med-a3 
 
255.255.255.0   192.168.10 .100 2
y   C-LAN  01A09 TN799 B  clan-b2 
 
255.255.255.0   192.168.20 .100 2
   n 
  255.255.255.0      .   .   .      
  255.255.255.0      .   .   .      
 
255.255.255.0      .   .   .      
Valid Values
Usage
y/n
Enter 
y
 to allow IP endpoints (phones and trunks) to use 
MedPro resources administered in regions that are different 
from the endpoints’ regions.
The MedPro and C-LAN boards are assigned to the regions 
specified in the Net Rgn field. Endpoints are assigned to the 
same region as the C-LAN boards they use.
The DEFINITY system first allocates MedPro resources that 
are assigned to the same regions as the endpoints. If demand 
for MedPro resources exceeds supply within the local region, 
available MedPro resources from other regions are used if this 
field is set to 
y
, or call blockage occurs if this field is set to 
n
.