Справочник Пользователя для Lucent Technologies Release 8.2
Other Networking-Related DEFINITY Screens
A
Screens Reference
Administration for Network Connectivity
CID: 77730
555-233-504 — Issue 1 — April 2000
298
Extended Trunk Access Call Screening
This screen allows a set of digit strings to be identified that should not be routed via
ETA. This screen can also block the routing of certain FACs or TACs. For example,
if the system administrator were to notice a digit string being mistakenly dialed
repeatedly that ended up being routed via ETA to a remote PBX only to have the
remote PBX return intercept treatment, then that digit string would be a candidate for
the entry into the ETA call screening table. Entry into this table would have the effect
of return intercept treatment to the caller without first attempting to route the digits to
the remote PBX for interpretation via ETA.
ETA. This screen can also block the routing of certain FACs or TACs. For example,
if the system administrator were to notice a digit string being mistakenly dialed
repeatedly that ended up being routed via ETA to a remote PBX only to have the
remote PBX return intercept treatment, then that digit string would be a candidate for
the entry into the ETA call screening table. Entry into this table would have the effect
of return intercept treatment to the caller without first attempting to route the digits to
the remote PBX for interpretation via ETA.
Call Screening Entry
Assign those digit strings (up to 10) that should be blocked for this RNX. Each string
can have up to 6 digits and/or special or wildcard characters.
can have up to 6 digits and/or special or wildcard characters.
Page 1 of 1
ETA CALL SCREENING TABLE
Entry
No. Call Screening Entry
0: ______
1: ______
2: ______
3: ______
4: ______
5: ______
6: ______
7: ______
8: ______
9: ______
ETA CALL SCREENING TABLE
Entry
No. Call Screening Entry
0: ______
1: ______
2: ______
3: ______
4: ______
5: ______
6: ______
7: ______
8: ______
9: ______
Valid entries
Usage
Digits
0
through
9
x
X
*
#
The
#
character may only be used as the
first character.
blank