Справочник Пользователя для Lucent Technologies Release 8.2
Centralized Voice Mail Via Mode Code
395
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
B
Private Networking
Centralized Voice Mail Via Mode Code
You can use a single voice mail system to support multiple DEFINITY and Merlin
Legend/Magix systems in a network via mode code. This capability is available for:
Legend/Magix systems in a network via mode code. This capability is available for:
•
DEFINITY ECS R8
•
Prologix R3
•
BCS Issue 6
•
Merlin Legend R6.1
•
Merlin Magix 1.0
Note:
DEFINITY One and Guestworks are not supported.
Voice mail systems that support these connections are:
•
Intuity AUDIX R4.4 or higher running on a MAP5, with up to 18 ports
•
Octel 100, with up to 16 ports
Configuration requirements
Centralized voice mail via mode code requires the following:
•
A DEFINITY ECS switch as the hub of the voice mail network, with the voice
mail system directly connected to it.
mail system directly connected to it.
•
Direct ISDN PRI tandem trunk connections, using DS1 service between the
DEFINITY ECS hub and the switches the voice mail supports. The system uses
the D-channel to transmit mode code signals to light message waiting lights on
remote extensions.
DEFINITY ECS hub and the switches the voice mail supports. The system uses
the D-channel to transmit mode code signals to light message waiting lights on
remote extensions.
•
A uniform dial plan for all switches in the network, with a 4-digit plan if Merlin
Legend/Magix is part of the network.
Legend/Magix is part of the network.
•
One and only one mailbox for each extension in the network.
Note:
DCS software, X.25 hardware, and CLAN hardware/software are
not required for this type of network. Additionally, you cannot
network switches simultaneously using both mode code and DCS.
not required for this type of network. Additionally, you cannot
network switches simultaneously using both mode code and DCS.