Справочник Пользователя для Lucent Technologies Release 8.2
DCS over IP Trunk
445
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
F
IP Trunk Installation and
Administration
Configuring Microsoft NetMeeting™ on a PC
After NetMeeting 2.0 is installed, the first time you start it the Configuration Wizard
prompts you to provide general information. After you provide the general
information, you must change some audio settings. Procedures for these tasks follow.
prompts you to provide general information. After you provide the general
information, you must change some audio settings. Procedures for these tasks follow.
Providing general
information for the
Configuration Wizard
information for the
Configuration Wizard
The first time you start NetMeeting, follow these steps.
1
To start NetMeeting, from the Windows Task bar click
Start>Programs>NetMeeting (default location).
Start>Programs>NetMeeting (default location).
Note:
You may follow a different procedure to start NetMeeting depending on
how your system is set up.
how your system is set up.
2
When prompted by the Configuration Wizard, respond as follows:
•
Choose not to log on to a directory server.
•
Provide your name, e-mail address, and other information.
•
Categorize your information as “For Business Use” or as appropriate.
•
Choose LAN or appropriate modem speed, (for example, 28.8.) for network
connection.
connection.
•
Click the Starting Recording button and speak into the microphone so that
NetMeeting can adjust the audio settings. This can also be accomplished using the
Audio Tuning Wizard from the main user interface.
NetMeeting can adjust the audio settings. This can also be accomplished using the
Audio Tuning Wizard from the main user interface.