Справочник Пользователя для Lucent Technologies Release 8.2

H.323 Trunk Administration

H.323 Trunks

Administration for Network Connectivity

CID: 77730

555-233-504 — Issue 1 — April 2000

H.323 Trunk Administration — Task Summary

After the enabling administration is complete, you can administer the H.323 IP trunks. The screens and fields
that need to be administered are listed below.

NOTE: This is only a list of screens and the fields that need to be
administered. The values that need to be entered in these fields are
described in the next section.

Node names

A node name and IP address must be entered on the Node Names screen for each
C-LAN and IP Interface board on the local switch. For each far-end node that the
H.323 trunks on the local switch will connect to, a node name and IP address must be
entered for the far-end gatekeeper, which is a C-LAN board if the far-end is a
DEFINITY switch. Enter values in these fields:

Node Name

IP Address

IP Interfaces

Each DEFINITY switch in an IP network has one IP Interfaces screen. One line on
this screen must be administered for each C-LAN and each IP Interface board. Enter
values in these fields:

Network regions are interconnected?

Enable

Type

Slot

Code

Sfx

Node Name

Subnet Mask

Default Gateway Address

Region

Ethernet Data Module

A data module screen, type ethernet, must be administered for each C-LAN board on
the switch. Enter values in these fields:

Type

Port

Link

Name

Network uses 1’s for broadcast address?