Справочник Пользователя для Lucent Technologies Release 8.2
Configuration 1: R8r <—ppp—> R8si
3
C-LAN Administration
Administration for Network Connectivity
CID: 77730
555-233-504 — Issue 1 — April 2000
62
Switch 1 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.
The node names and IP addresses in any network should be assigned in a logical and
consistent manner from the point of view of the whole network. These names and
addresses should be assigned in the planning stages of the network and should be
available from the customer system administrator or from a Lucent representative.
consistent manner from the point of view of the whole network. These names and
addresses should be assigned in the planning stages of the network and should be
available from the customer system administrator or from a Lucent representative.
Note:
Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter
node names for switches, routers, and CMS starting on page 2.
node names for switches, routers, and CMS starting on page 2.
Begin
Steps
> Open Node Names screen — enter
ch node-n
> Go to page 2 of the screen
> Enter values.
> Submit the screen
End
change node-names Page 2 of 6
NODE NAMES
NODE NAMES
Name IP Address Name IP Address
default___________
default___________
0__.0__.0__.0__ __________________
___.___.___.___
node-1____________
192.168.10_.31_ __________________
___.___.___.___
node-2____________
192.168.10_.32_ __________________
___.___.___.___
__________________
___.___.___.___ __________________
___.___.___.___
Field
Conditions/Comments
Name
Enter unique node names for the following 2 nodes:
•
C-LAN PPP port on Switch 1
•
C-LAN PPP port on Switch 2.
IP Address
The unique IP addresses of the nodes named in the previous field.