Справочник Пользователя для Barco SJ/T 11363-2006

PDS Command List

The table below lists PDS remote commands.

The following commands are for the PDS-902 and PDS-901 
units. For a PDS-701 unit, the input parameter range cannot 
include inputs 7 or 8.

PDS Remote Commands 

Enable/Disable DHCP mode

Get MAC Address

Set gateway to be used when DHCP is OFF

Set Static IP Address to be used when DHCP is OFF

Set subnet mask to be used when DHCP is OFF

Puts black into the program input

Set cable equalization

Set Input EDID Resolution

Set EDID type

Freeze the input on program

Selects the input path to adjust (preview or program)

Reset the input timing parameters to default values for analog.

Adjust Input Aspect Ratio

Input Source Acquire Mode

Attempts to detect and adjust input video to the active video area

Query only command for input availability

Input brightness adjust

Delete Input Configuration

Input contrast adjust

Input Phase Adjust

Recalls saved input configuration for selected input

Reset Input Configuration to default values

Saves Input Configuration