Справочник Пользователя для Barco SJ/T 11363-2006

Setup Menu

If the programming is successful, the following message is displayed: 

Programming EDID Message 2  

If the EDID programming failed, the following message will be displayed: 

EDID Programming Failed Message

If this message persists, please contact customer service for technical support. 

 to 8) — This field applies to inputs 5 through 8 only, allowing you to select 

between Digital or Analog EDID for these inputs.  Please note:

When the Input field is set to 5 through 8, the Type field is selectable 
between ANALOG or DIGITAL, and the current Type is reflected.  
Changing this field triggers the programming process as soon as SEL is 
pressed, using the currently shown resolution in the Format field. 

When ALL is selected in the Input field, the Type field reflects Input 5. 
Any triggering of the programming process changes inputs 5 through 8 to 
the selected option in this field.

From the System Menu, select DVI Cable Equal to display the DVI Cable Equalizer 
Menu

, which enables you to adjust input cable equalization parameters for both DVI inputs 

simultaneously, or individually for inputs 5 through 8. 

DVI Cable Equalizer Menu (sample)

EDID Prog Done

Connect input cables

and reboot the PC

ESC = Continue

At this point, reboot the external computer(s) in order for the 
new EDID information to be read, and the new preferred 
resolution to become available.

EDID Prog failed!

ESC = Continue

DVI CABLE EQUALIZER

> Input

All

Equalization

12

Set to Default

Set to Maximum

Set to Minimum