Справочник Пользователя для APC AP9254

1. Follow steps 1-6 of the Basic Installation section.

2. Plug the 25-pin “D” connector of your input cable into any avail-

able channel port on the rear of your base switch unit.

3. Plug the 15-pin video connector on the other end of the cable into

the port labeled 

 on your first cascading KVM switch unit. Plug

the PS/2 mouse connector, designated by a mouse icon, into the 
port. Plug the remaining 6-pin miniDIN keyboard connector into
the 

 port.

4. Repeat steps 2-3 for every cascaded switch unit in your system.

5. Power-up your switch unit(s) first, then all attached computers.

 !

 !