Справочник Пользователя для Asante Technologies 35516

 

5 

 
Thank you for purchasing the Asanté IntraCore 35516 Series Gigabit switch. The IC35516 is from a family of 
multi-media and multi-protocol switches capable of supporting Layer 2 switching and Layer 3 and Layer 4 
protocols. They are designed to offer industry-leading performance at a very competitive cost of ownership. 
 
Important! This manual describes the hardware setup and configuration commands that are used by the 
IC35516. It is not intended to be a complete configuration guide for your specific network requirements. 
 
Each IntraCore 35516 switch is a 16-port solution for Gigabit Ethernet switching using shared-memory 
architecture to achieve Gigabit switching on all ports. The highly integrated system includes MACs, Address 
Look-up, Content Addressable Memory (CAM), Switch Engine, Primary Buffer Memory, and programmable 
Quality of Service (QoS). 
 
Two models in the IntraCore 35516 series cover different customer applications. 
 
The IC35516-T is a 16-port switch that has 12 10/100/1000BaseT ports and 4 dual function Gigabit ports 
that support   either 1000BaseT RJ-45 Gigabit ports or GBIC Gigabit ports. 
 
The IC35516-G is a 16-port switch that has 12 GBIC style Gigabit Ethernet ports and 4 dual function Gigabit 
ports that support either 10/100/1000BaseT RJ-45 Gigabit ports or GBIC Gigabit ports.

 

 
The following types of GBIC modules are supported on the IC35516 switches: 
 

• 

1000SX multi-mode fiber for 500 m applications 

• 

1000LX single-mode fiber for 2 km applications 

• 

1000LH single-mode fiber for 20 km applications 

• 

1000LZ single-mode fiber for ultra distance (120 km) applications 

• 

1000BaseT copper gigabit for low-cost 100 m applications 

 
The system can operate as a stand-alone network or be used in combination with other IntraCore switches 
in the backbone.

 

 

 
The IC35516 is a multi-media, multi-protocol (Ethernet, L2/L3/L4) switch. The following is a list of the 
switch’s features: 
 

•  16 Port 10/100/1000 switch/router, integrating MACs, CAM, packet buffer memory, and switching 

engine 

•  Supports wire-speed L2 switching and L3 routing including L2 and IP multicast 

•  QoS provisioning on Layers 2/3/4 and 802.1p tag 

•  Flexible wire-speed packet classification 

•  Packet filtering 

•  Wire-speed MAC address learning on-chip 

•  Port-based VLAN support for 4K VLANs according to IEEE Std. 802.1Q 

•  SNMP, RMON, and SMON statistics counters supported on-chip 

•  128 KB internal packet buffer 

•  Full Duplex 1000 Mbps, Full and Half Duplex 10/100 Mbps 

•  Support for Jumbo frames (up to 32 KB in length)