Справочник Пользователя для Atlona AT-HD-V1616M

Output Selection:
Press the number of the corresponding output (display) you wish 
to select. For numbers 10 and above, select 10+ and the number 
following. Example: 13 = 10+ and 3

Input Selection:
Press the number corresponding with the input you wish to select, 
for numbers 10 and above select 10+ and the number following. 
Example: 10 = 10+ and 0

Menu Selection:
Choose the action you wish to perform. At this time with just the 
AT-HD-V1616M the only menu items you will use are AV and 
ALL. Example: Input 3 with output 5. Press #3 in the input section, 
press AV, and then press #5 in the output section. The LCD 
display will show the input as 3B5 on its screen.

Note:
Multiple outputs are not selectable through the IR Remote control 
at this time. They are available through the front panel, TCP/IP 
and RS-232 controls.

TCP/IP is another way to control your AT-HD-V1616M. Connect with an ethernet cable to your 
network or computer. After connecting the cable you’ll need to configure the IP on your computer.

I

P address: 

 

192.168.0.80

Subnet mask:  

255.255255.0

Default gateway: 

192.168.0.1

Preferred DNS: 

202.96.134.133

Alternate DNS: 

202.96.128.68

Use a straight cable to connect to a router or network.

Use a crossover cable to connect directly to a computer.