Справочник Пользователя для 3com Switch 4500G 24-Port Switch 4500G 48-Port Switch 4500G PWR 24-Port Switch 4500G PWR 48-Port

If you have logged on correctly, the switch you want to manage is displayed as 
<4500G>

, as shown in Figure 23 on page 38.

To set up command line interface management using SSH, refer to the chapter 
entitled “SSH Terminal Service” in the “3Com® Switch 4500G Family 
Configuration Guide.”

This section describes how you can set up web interface management over the 
network.

■

Ensure that you have already set up the switch with IP information as described 
in “Methods of Managing a Switch” on page 31.

■

Ensure that the switch is connected to the network using a Category 5 twisted 
pair Ethernet cable with RJ-45 connectors.

■

A suitable Web browser.

To display the web interface correctly, use one of the following Web browser and 
platform combinations:

For the browser to operate the web interface correctly, JavaScript™ and Cascading 
Style Sheets must be enabled on your browser. These features are enabled on a 
browser by default. You will only need to enable them if you have changed your 
browser settings.

Table 10   Supported Web Browsers and Platforms

Netscape 7.1

Yes

Yes

No

No

Yes

Internet Explorer 5.5 Yes

Yes

Yes

No

No

Internet Explorer 6.0 Yes

Yes

Yes

No

No

Mozilla 1.4

No

No

No

Yes

Yes