Справочник Пользователя для 3com Webcache 3000 (3C16116)
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
12
C
OMMAND
L
INE
I
NTERFACE
The Webcache 1000/3000 has a Command Line Interface that allows you
to manage certain features from a terminal. You may want to use the
Command Line Interface to setup the Webcache for management
through the console port or over your network via Telnet.
to manage certain features from a terminal. You may want to use the
Command Line Interface to setup the Webcache for management
through the console port or over your network via Telnet.
This chapter describes how to access and use the Command Line
Interface. It covers the following topics:
Interface. It covers the following topics:
■
■
■
■
■
■
■
■
Accessing the
Command Line
Interface
Command Line
Interface
You can access the Command Line Interface using:
■
A terminal or terminal emulator connected to the console port of the
Webcache directly, or through a modem.
Webcache directly, or through a modem.
■
A terminal or terminal emulator connected to the Webcache over an
IP network using Telnet. You can do this in two ways:
IP network using Telnet. You can do this in two ways:
■
Run a telnet session explicitly to the IP address or Domain Name
System (DNS) name of the Webcache.
System (DNS) name of the Webcache.
■
Select System -> Control -> Telnet in the Web interface. This opens
a telnet session to the Command Line Interface.
a telnet session to the Command Line Interface.
You must use a VT52 or VT100/ANSI compatible terminal emulator.