Справочник Пользователя для 3com Webcache 3000 (3C16116)

C

HAPTER

 2: I

NSTALLING

 

THE

 W

EBCACHE

Figure 14   User name and password screen

If the user name and password screen is not displayed, see “Solving Web 
Interface Problems” on page 130.

4 Enter your user name and password. For further information, see 

“Logging in as a Default User” on page 58. Click OK.

5 The Getting Started wizard is displayed when the Web interface has 

loaded. You must configure the basic settings of the Webcache by 
completing the Getting Started wizard before you introduce the 
Webcache to your live network. For more information, see “Getting 
Started Wizard Settings” on page 43.

You can setup the Webcache for management via the Command Line 
Interface by running a Telnet session on a management workstation that 
is connected to the Webcache over your test network, or locally via a 
console port connection.

The Webcache is pre-configured with a default IP address, which is within 
the range of addresses reserved by the IETF for private IP networks. This 
default address allows you to run the Command Line Interface without 
any initial configuration of IP addresses. The default IP address of the 
Webcache is 192.168.1.253.

Figure 15   Setting Up Over the Test Network

Client Machine

Webcache

SuperStack 3

®

3C16116

Webcache 3000

Power/Self test

Activity

Cache Storage Status

green = ok

yellow = failed

green = 100 Mbps

yellow = 10 Mbps

Link Status

3

1

2

Cache Storage Status

3

2

Link Status

Activity

LAN

LAN

LAN

WAN

Switch/Hub

Client Machine