Справочник Пользователя для DELL 2161DS

Product Overview

Figure 1-2. 2161DS Console Switch

NOTE:

You can access up to 256 servers in a fully configured system by connecting a 16-port analog

switch to each ARI port.

Interoperability with Avocent A1000R/A2000R Switches

The Remote Console Switch Software can also be used to view and control Avocent

A1000R/A2000R switches and all attached servers.

NOTE:

Dell SIPs may not be used to connect servers to Avocent A1000R/A2000R switches. Use Avocent

AVRIQs for this configuration.

Safety Precautions

Use the following safety guidelines to help ensure your own personal safety and to help protect your

system and working environment from potential damage.

CAUTION:

There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Discard used batteries
according to the manufacturer’s instructions.

CAUTION:

The power supplies in your system may produce high voltages and energy hazards, which

can cause bodily harm. Only trained service technicians are authorized to remove the covers and
access any of the components inside the system. This warning applies to Dell™ PowerEdge™ servers,

Dell PowerVault™ storage systems.

CAUTION:

This system may have more than one power supply cable. To reduce the risk of electrical

shock, a trained service technician must disconnect all power supply cables before servicing the

system.

This document pertains only to the Dell 2161DS Console Switch. You should also read and follow

the additional safety instructions contained elsewhere:

•

The 2161 DS Console Switch Installation Guide included with your rack solution that

describes how to install your system into a rack.

•

The User's Guide which provides information about setting up and operating your rack

mounted server system.

•

The Avocent AutoView 1000R/2000R Installer/User’s Guide if applicable.