Справочник Пользователя для Casio ACSDSBUASYN

This appendix describes the Cisco ME 4924-10GE  switch ports and the cables and adapters that you use 
to connect the switch to other devices.

These sections describe the connectors used with the switch.

When connecting the ports to 1000BASE-T devices, such as servers, workstations, and routers, you must 
use a four-twisted-pair, Category 5, straight-through cable wired for 10BASE-T, 100BASE-TX, and 
1000BASE-T. 

When connecting the ports to other devices, such as switches or repeaters, you must use a 
four-twisted-pair, Category 5, crossover cable. Be sure to use a four-twisted-pair, Category 5 cable when 
connecting to a 1000BASE-T-compatible device.

Use a straight-through cable to connect two ports only when one port is designated with an X. Use a 
crossover cable to connect two ports when both ports are designated with an X or when both ports do 
not have an X.

The Cisco ME 4924-10GE  switch uses SFP modules for fiber-optic and copper uplink ports. Refer to 
the Cisco ME 4924-10GE  switch release notes for a list of supported SFP modules.

58476