Справочник Пользователя для Q-Logic MKII-BASE16
GigWorks MkII-16 Switch Model MKII-BASE16
Installer's/User's Manual 59003-01 Rev. A
Installer's/User's Manual 59003-01 Rev. A
Switch Management
3-47
Managing the Switch Using TFTP
Retrieving the Index of Valid Switch File Names:
The Switch contains a file called index which lists the valid file names, their file
type (binary or text), and their read/write permissions. This index can be
retrieved by connecting to the Switch using TFTP in text file transfer mode and
getting the file named index .
type (binary or text), and their read/write permissions. This index can be
retrieved by connecting to the Switch using TFTP in text file transfer mode and
getting the file named index .
To retrieve the index of valid Switch file names:
1.
Connect to the Switch using TFTP.
2
Select text file transfer mode.
3.
Retrieve the file named index .
For example, your TFTP session may look like this if you are using a Unix
management station:
management station:
#tftp
(Start TFTP)
tftp> connect 10.0.0.1
(Connect to the Switch using TFTP)
tftp> text
(Select text file transfer mode)
text mode
tftp> get index
(Retrieve the file from the Switch)
transferred 254 bytes in 0.5 seconds.
#cat index
(Look at the contents of the index file.)
Ancor MKII TFTP files:
config mgmt. CPU configuration rw text
index this list of files r- text
mkiiload Switch control code -w binary
mkiimgmt mgmt. interface code rw binary*
reset reset MKII switch rw either
test file transfer test file rw either*
#
Note* 16-Port Switch only.