Справочник Пользователя для Cabletron Systems STHI

Installing the STHI

Page 3-3

Figure 3-2. Installing the Rack-Mount Brackets

With the mounting brackets installed, position the STHI between the
vertical frame members of the 19-inch rack and fasten it securely with
the mounting screws as shown in Figure 3-3.

Figure 3-3. Installing the STHI in a Rack

3.1.5

Wall-Mounting the STHI

When an STHI is installed on a wall, it must face downward so that all
attached cables will hang straight out from the TCUs, rather than prying
at angles to the ports.

Use the provided 3/8” screws to attach the wall-mounting brackets to
the bottom of the STHI as shown in Figure 3-4. There are two brackets,
one for each side.

Screws (4)

Rack Mounting Brackets (2)

LANVIEW

SUPPORTING 100 OHM UTP CABLE

HubSTACK

STHI-24

TOKEN RING HUB

WITH

24X 23X 22X 21X 20X 19X

18X 17X 16X 15X 14X 13X

12X 11X 10X 9X 8X 7X

6X 5X 4X 3X 2X 1X

RESET

CPU

ACT

MGMT

16 Mb/s

SPEED

16M

COM