Справочник Пользователя для Mitsubishi Electronics XL21
PH50, XL50, XL21 series Set-up and Installation Manual
14
1.2.6.2. Screen
detaching
For
5
5
0
0
”
”
which is supplied with the screen fitted, the screen unit should be detached before
installation. (For
6
6
7
7
”
”
, the screens are provided separately.)
6
6
7
7
”
”
: Screen attaching/detaching work should be done by two or more people.
Be careful not to trap your fingers when you slide its arms during detaching/attaching work.
1.
1.
5
5
0
0
”
”
: Remove two screen-fixing bolts (M6 – 45mm,
gold hexagon socket).
Caution
Before shipment, be sure to tighten the bolts (see
chapter 2.5.4, on page 86). Shipping the product
without tightening may cause breakage.
chapter 2.5.4, on page 86). Shipping the product
without tightening may cause breakage.
2. Pull screen-drawing handles in both sides to draw the screen
till locked.
3. Lift up and detach the screen unit with pushing
screen-detaching levers located inside the screen unit in
both sides. Be careful not to
push the adjacent flip-up lock
lever.
both sides. Be careful not to
push the adjacent flip-up lock
lever.
4. Press down the slide lock levers in both sides to unlock, and
put back the screen-holding arms.
6
6
7
7
”
”
: The levers can be
unlocked respectively.
Screen-fixing
bolts
Screen-drawing handle
Screen-detaching lever (inside the screen unit)
Screen-holding arm
(Flip-up lock lever)
Slide lock lever (Inside the arm)
Push