Справочник Пользователя для Mitsubishi Electronics XL21
PH50, XL50, XL21 series Set-up and Installation Manual
44
1.5.2. Color balance adjustment
You can adjust luminance and tint between each screen of a display wall. In principle, they
should be adjusted according to (3) CSC adjustment. However, follow (2) BLACK LEVEL, (4)
WHITE BALANCE and (5) GRADATION adjustments, if necessary.
After that, set TARGET COLOR and SENSOR to maintain the uniformity over the long term.
should be adjusted according to (3) CSC adjustment. However, follow (2) BLACK LEVEL, (4)
WHITE BALANCE and (5) GRADATION adjustments, if necessary.
After that, set TARGET COLOR and SENSOR to maintain the uniformity over the long term.
Color balance adjustment flow chart
1.5.2.1. Preparation
Before the adjustment, set each value according to the following table.
Item
Value
Menu
1 CONTRAST
100
Input memory menu
2 BRIGHTNESS
0
Input memory menu
3
COLOR MATRIX
OFF
Input memory menu
4 WHITE
BALANCE
R-GAIN 1000
G-GAIN 1000
B-GAIN 1000
INSTALLATION in system menu
5 WHITE BOOST
OFF
MISC FUNCTION in system menu
6 SENSOR
STOP or OFF
MAINTENANCE in system menu
1.5.2.2. BLACK
LEVEL
This adjustment is not necessary.
Adjust it when the difference of luminance and tint in black is noticeable between each screen. Be
careful not to deteriorate the contrast because it can be adjusted only by increasing the black
luminance level.
Adjust it when the difference of luminance and tint in black is noticeable between each screen. Be
careful not to deteriorate the contrast because it can be adjusted only by increasing the black
luminance level.
[Procedure]
1. Press [TEST] button three times and press [R], [G] and [B] button to display the black signal
1. Press [TEST] button three times and press [R], [G] and [B] button to display the black signal
in the adjustment white.
2. Select BLACK LEVEL in INSTALLATION in the system menu.
3. Select R-, G- or B-LEVEL and adjust each color level in black.
3. Select R-, G- or B-LEVEL and adjust each color level in black.
1.5.2.3. CSC (Color Space Control)
There are 3 ways to adjust CSC values.
•
•
By “Auto CSC” function in Wallaby
•
With a color analyzer
•
By manual
1.5.2.3.1. By
“Auto CSC” function
Using “Auto CSC” function in adjustment software, “Wallaby”, the color balance can be
automatically adjusted among a display wall. See “Auto CSC function” on page 103 for detail.
automatically adjusted among a display wall. See “Auto CSC function” on page 103 for detail.
1.5.2.3.2. With color analyzer
Optimum CSC values can be automatically calculated from the color component data in each
screen measured with a specified color analyzer. See separately provided “CSC Auto-adjust
Software Operation Manual” for detail.
screen measured with a specified color analyzer. See separately provided “CSC Auto-adjust
Software Operation Manual” for detail.
CSC
adjustment (3)
BLACK LEVEL
adjustment (2)
GRADATION
adjustment (5)
SENSOR
Setting (7)
Preparation
(1)
TARGET COLOR
Setting (6)
WHITE BALANCE
adjustment (4)