Справочник Пользователя для Panasonic PT-DW8300U
PICTURE menu
ENGLISH -
57
Settings
SYSTEM SELECTOR
This enables the projector to automatically recognize
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
Press ▲▼ to select [SYSTEM
1 )
SELECTOR].
Press <ENTER> button.
2 )
Press ▲▼ to switch [SYSTEM
3 )
SELECTOR].
Press <ENTER> button.
4 )
J
VIDEO/S-VIDEO terminal input
signal
signal
Select from AUTO, NTSC, NTSC4.43, PAL,
PAL-M, PAL-N, SECAM, and PAL60.
PAL-M, PAL-N, SECAM, and PAL60.
Attention
[AUTO] mode is selected by default.
z
When the projector is not working properly in [AUTO]
z
mode, change the setting according to each SYSTEM
SELECTOR type.
SELECTOR type.
Note
[AUTO] automatically selects from NTSC, NTSC4.43,
z
PAL, PAL-M, PAL-N, SECAM, and PAL60.
J
RGB1/RGB2 terminal input signal
480i, 576i, 576p signals
z
Select from RGB and YC
B
C
R
.
VGA60, 480p signals
z
Select from VGA60, 480p, and 480pRGB.
Other signals
Other signals
z
Select from RGB and YP
B
P
R
.
Note
Refer to
z
available signals.
J
DVI-D terminal input signal
480p, 576p signals
z
Select from RGB and YC
B
C
R
.
Other signals
z
Select from RGB and YP
B
P
R
.
Note
Refer to
z
available signals.
Malfunction may occur or other problems could be
Malfunction may occur or other problems could be
z
encountered with some equipment.
J
HDMI terminal input signal
480p, 576p signals
z
Select from Auto, RGB, and YC
B
C
R
.
Other signals
z
Select from Auto, RGB, and YP
B
P
R
Note
Refer to
z
available signals.
Malfunction may occur or other problems could be
Malfunction may occur or other problems could be
z
encountered with some equipment.
J
SDI terminal input signal
(PT-DZ8700U/PT-DS8500U only)
Select from AUTO, 1 080/60i, 1 035/60i,
z
z
To display pictures complying
with the sRGB standard
with the sRGB standard
sRGB is the international color reproduction standard
(IEC61966-2-1) established by IEC (International
Electrotechnical Commission).
To reproduce colors more faithfully in compliance
with the sRGB standard, perform the following setting
procedure.
(IEC61966-2-1) established by IEC (International
Electrotechnical Commission).
To reproduce colors more faithfully in compliance
with the sRGB standard, perform the following setting
procedure.
Set [COLOR MATCHING] adjustment to
1 )
[OFF].
Refer to “COLOR MATCHING”
z
Display the [PICTURE] screen.
2 )
z
Press ▲▼ to select [PICTURE MODE].
3 )
Press ◄► to select [NATURAL].
4 )
Press ▲▼ to select [COLOR].
5 )
Press <DEFAULT> button on the
6 )
remote control to restore the factory
default.
default.
Follow the same procedure (steps
7 )
5-6) to restore the factory default for
[TINT], [COLOR TEMPERATURE] and
[GAMMA].
[TINT], [COLOR TEMPERATURE] and
[GAMMA].
Note
sRGB is only enable when RGB signals are being input.
z