Справочник Пользователя для Panasonic PT-DW8300U
ENGLISH -
91
Settings
SECURITY menu
z
z
When you apply to the [SECURITY] menu
z
before you change the password to your original,
perform to input the following factory default
password operation.
Press
perform to input the following factory default
password operation.
Press
▲►▼◄▲►▼◄ and <ENTER> button.
Attention
When you apply to the SECURITY menu after you
z
change the password to your original in the [SECURITY
PASSWORD CHANGE] menu, input the original
password operation.
PASSWORD CHANGE] menu, input the original
password operation.
Note
Only asterisks * will appear on the screen to represent
z
the actual characters of the password when the password
is entered.
is entered.
SECURITY PASSWORD
The [SECURITY PASSWORD] screen can be
displayed when the power has been turned on. If the
correct password is not entered, operations other
than using <STANDBY (
displayed when the power has been turned on. If the
correct password is not entered, operations other
than using <STANDBY (
)> button and <SHUTTER>
button and adjusting the lens will not be possible.
Press ▲▼ to select [SECURITY
1 )
PASSWORD].
Press ◄► to switch [SECURITY
Press ◄► to switch [SECURITY
2 )
PASSWORD].
The setting will change as follows each time
z
◄► is pressed.
OFF
ON
OFF
Deactive
ON
Active
Note
[PASSWORD] is set to [OFF] by default and when
z
initialized.
Change the SECURITY PASSWORD regularly and make
Change the SECURITY PASSWORD regularly and make
z
it uneasy to guess.
The security password becomes valid when setting of
The security password becomes valid when setting of
z
the security password is turned [ON] and then the MAIN
POWER switch is turned off.
POWER switch is turned off.
SECURITY PASSWORD
CHANGE
CHANGE
The password can be changed.
Press ▲▼ to select [SECURITY
1 )
PASSWORD CHANGE].
Press <ENTER> button.
2 )
The [SECURITY PASSWORD CHANGE]
z
screen will be displayed.
Press ▲▼◄► and numeral keys to
3 )
set the password.
Up to 8 buttons can be set as the password.
z
Press <ENTER> button.
4 )
For the purposes of confirmation,
5 )
enter the password again.
Press <ENTER> button.
6 )
Note
Only asterisks * will appear on the screen to represent
z
the actual characters of the password when the password
is entered.
If the password input second does not match with the
is entered.
If the password input second does not match with the
z
password input first, an error message is displayed. In
this case, input the correct password again.
When numerals are used in the SECURITY PASSWORD,
this case, input the correct password again.
When numerals are used in the SECURITY PASSWORD,
z
initialization of the security password will be necessary if
the remote control is lost. For the method of initialization,
consult your dealer.
the remote control is lost. For the method of initialization,
consult your dealer.