Справочник Пользователя для Toshiba ProT1!0
Chapter 2 Troubleshooting Procedures
Procedure 3
Diagnostic Test Program Execution Check
the HDD test program.
statuses are described in Table 2-5-1. If an error code is not displayed but the
problem still occurs, go to Procedure 5.
s
The HDD test program is stored in the Diagnostics Disk. Perform all of the HDD tests in the
Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about
Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and
error codes and
Code Statu
01 Bad
Error
Command
02
ror
Bad Address Mark Er
04 Record
Not
Found
05
HDC Not Reset Error
07
Drive Not Initialized
09 DMA
Boundary
Error
0A
Bad Sector
0B
Bad Track Error
10 ECC
Error
11 ECC
Recover
Enabled
20 HDC
Error
40 Seek
Error
80
Time Out Error
AA
Drive Not Ready
Table 2-5-1 HDD error code & status
BB Undefined
Error
CC Write
Fault
E0 Status
Error
F0
No Sense Error
?? Other
Error
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
16