Справочник Пользователя для Zebra Technologies ZD500
Printer Options
Cutter Option
Cutter Option
104
P1062653-002 Rev. A
ZD500 Series™ Thermal Transfer Printer User’s Guide
1/16/2014
Loading Media with the Cutter Option
1.
Open the printer. Remember that you need to pull the release latch levers toward the front
of the printer.
of the printer.
2.
Adjust the media sensor’s position for labels or continuous media to the center position. If
the media has black marks (not full width black lines) or notches, then see
the media has black marks (not full width black lines) or notches, then see
3.
Open the media roll holders. Pull the media guides open with your free hand and place the
media roll on the roll holders and release the guides. Orient the media roll so that its
printing surface will be up as it passes over the platen (drive) roller.
media roll on the roll holders and release the guides. Orient the media roll so that its
printing surface will be up as it passes over the platen (drive) roller.