Справочник Пользователя для Zebra Technologies ZD500
Setup
Configure Using the Connectivity Wizard
Configure Using the Connectivity Wizard
34
P1062653-002 Rev. A
ZD500 Series™ Thermal Transfer Printer User’s Guide
1/16/2014
Configure Using the Connectivity Wizard
The ZebraNet Bridge Enterprise utility resides on the User CD for your printer and is available
through
through
. ZebraNet Bridge Enterprise version 1.2.5 or later is
required to configure the printer correctly for use.
The Connectivity Wizard, which is part of this software, allows you to configure your printer
easily for wireless operation by writing the appropriate ZPL script for you. Use this utility
when you are first installing the wireless print server or after you set the network options back
to factory defaults.
easily for wireless operation by writing the appropriate ZPL script for you. Use this utility
when you are first installing the wireless print server or after you set the network options back
to factory defaults.
To use the Connectivity Wizard, complete these steps:
1.
If it is not already installed, install ZebraNet Bridge Enterprise on your computer.
You can get the program from the user CD that came with your printer, or you can
download it at
You can get the program from the user CD that came with your printer, or you can
download it at
.
2.
Launch the ZebraNet Bridge Enterprise program.
If you are prompted for a serial number, you may click
If you are prompted for a serial number, you may click
Cancel
. You will still be able to
use the Connectivity Wizard.
3.
From the Menu bar, select
Tools > Connectivity Wizard
.
The Connectivity Wizard opens.
Note •
You can only set up one print server at a time with the Connectivity Wizard. To
configure multiple print servers (wired and wireless), run the program once for each print
server.
server.