Справочник Пользователя для Zebra Technologies ZD500
61
Printer Configuration
Changing Printer Settings
1/16/2014
ZD500 Series™ Thermal Transfer Printer User’s Guide
P1062653-002 Rev. A
NETWORK Menu
Table 9 • NETWORK Menu
WIRED or
WLAN
IP Address
WLAN
IP Address
View or Set the Printer’s IP Address
View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see RESET NETWORK
in this section).
View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see RESET NETWORK
in this section).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Wireless: ip.addr, wlan.ip.addr
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Network Communications Setup >
TCP/IP Settings
WIRED or
WLAN
Subnet Mask
WLAN
Subnet Mask
View or Set the Subnet Mask
View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL
to
PERMANENT
, and then
reset the print server (see RESET NETWORK in this section).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.netmask
Wireless: wlan.ip.netmask
Wireless: wlan.ip.netmask
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Network Communications Setup >
TCP/IP Settings
WIRED or
WLAN
Gateway
WLAN
Gateway
View or Set the Default Gateway
View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL
to
PERMANENT
, and then
reset the print server (see RESET NETWORK in this section).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.gateway
Wireless: wlan.ip.gateway
Wireless: wlan.ip.gateway
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Network Communications Setup >
TCP/IP Settings