Справочник Пользователя для Zebra Technologies ZD500
69
Printer Configuration
Changing Printer Settings
1/16/2014
ZD500 Series™ Thermal Transfer Printer User’s Guide
P1062653-002 Rev. A
LANGUAGE Menu
Table 11 • LANGUAGE Menu
Language
If necessary, change the language that the printer displays.
This change affects the words shown on the following:
This change affects the words shown on the following:
•
the Home menu
•
the user menus
•
error messages
•
the printer configuration label, the network configuration label, and other labels that you
can select to print through the user menus.
can select to print through the user menus.
Note •
The selections for this parameter are displayed in the actual languages to
make it easier for you to find one that you are able to read.
Accepted values:
See the ZPL programmer’s guide - ZPL and SGD enter
the values differently.
the values differently.
Related ZPL command(s):
^KL
SGD command used:
display.language
Printer web page:
View and Modify Printer Settings > General Setup >
Language
Language
ZPL
Override
Override
Enable ZPL Override
Enable this menu item to prevent the following ZPL commands from changing the printer’s
current settings:
Enable this menu item to prevent the following ZPL commands from changing the printer’s
current settings:
•
^MM
(print mode)
•
^MT
(Direct Thermal or Thermal Transfer print method)
•
^MN
(media type non-continuous or continuous)
When this menu item is disabled, these commands override the printer’s settings.
Accepted values:
•
DISABLED
•
ENABLED
Related ZPL command(s):
none
SGD command used:
zpl.zpl_override
Printer web page:
N/A