Справочник Пользователя для Ricoh 3030

Form Feed

101

This section gives instructions for op-
erating the machine when there is no
tray for the selected paper size or
type, or when paper loaded in the
machine has run out.

❒ The tray cannot be changed if the

following functions are set for it:
• Staple
• Duplex Print to a tray that does

not support duplex printing

• Cover sheet
• Front  and  Back  cover
• Slip sheet

❒ If form feed is selected for a tray

with the following settings, you
can change the tray by canceling
the settings:
• Staple
• Duplex

❒ If Auto Continue is selected, form

fed paper is printed after a set in-
terval. See p.128 “System”.

If the machine does not have a tray for
the selected paper size or paper type,
or if the selected paper loaded in the
machine has run out, a caution mes-
sage appears.
If this message appears, do one of the
following:

A

Select the tray for form feed from
those that appear on the display
panel.
If you want to print after adding
paper to the tray, select the tray af-
ter loading the correct paper.

❒ To load paper in the bypass tray,

see p.13 “Setting Paper on the
Bypass Tray”.

B

Press [Continue].
The machine prints using the se-
lected tray.

❒ If a tray with a smaller paper

size is selected, the print job
may be cut short, or other prob-
lems may occur.