Справочник Пользователя для Compaq 5200

Configuring the product from the Settings screens

ENWW

Configuring outgoing e-mail

You must configure outgoing e-mail if you intend to use the Alerts or AutoSend features.

Gather the following information. (Your organization’s network or e-mail administrator
typically provides the information that is required to configure outgoing mail.)

• The IP address of the simple mail transfer protocol (SMTP) mail server on your network.

The EWS uses the SMTP server IP address to relay e-mail messages to other
computers.

• The e-mail domain name suffix that is used to address e-mail messages within your

organization.

Select the

Enable Outgoing E-mail

check box.

Type the SMTP server IP address in the

SMTP Server

text box.

Type the domain name, and then click

Apply

to save the changes.

Configuring incoming e-mail

You should configure incoming e-mail if you intend to request information pages from the
product by using e-mail messages. For more information, see

“Sending e-mail commands to the

product” on page 29

Establish a Post Office Protocol 3 (POP3) mailbox account for the product on a mail server
within your organization’s network.

Each POP3 account requires a username and a password. The username combined with
the product’s domain name (which is specified in the outgoing mail configuration) is the
e-mail address for the product. For example, if the POP3 mailbox account username is
“product” and the POP3 server is “hp.com”, the product’s e-mail address is
“product@hp.com”.

Note

Each

product

that is configured for incoming mail must have its own POP3 mailbox account on

your network’s e-mail server.

The POP3 mailbox accounts are typically configured by your organization’s network or e-mail
administrator.

Select the

Enable Incoming E-mail

check box.

Type the IP address of the POP3 mail server in the

POP3 Server

text box.