Справочник Пользователя для Toshiba B-852-R

 

EO18-33018 

2.5 Replacing the Stepping Motor

 

 

2-8 

 

1)  Remove the side cover L and MAIN PC board ass’y from the printer. 

 

(Refer to Sections 2.1 and 2.3.) 

2)  Remove the two SMW-3x6 screws to detach the PCB support plate from the printer.

 

 

 

 

3)  Remove the two SM-4x8 screws to detach the stepping motor from the printer.

 

 

 

 

 

4)  Disconnect the harness from the stepping motor. 

 

 
 

 

 

 
 
 
5)  Replace the stepping motor with a new one, then reassemble in the reverse order of removal. 

6) 

Perform a test print to print to confirm that the printer works properly.

 

 

PCB Support Plate

SMW-3x6 Screw 

Stepping Motor

SM-4x8 Screw

SM-4x8 Screw

Stepping Motor

Stepping Motor Harness