Справочник Пользователя для Christie Digital Systems CX50

Section 1: Introduction

1-2 RPMX/CX50/CX60/CX67 User’s Manual

How the projector works

The projector operates based on DLP

 technology by Texas Instruments. An

external source provides the necessary XGA input signals accepted by the
projector. An internal 120W UHP lamp generates light, which then travels
through a rotating color wheel alternately passing red, green and blue light to the
single 0.7" imaging panel (also called a digital micromirror device or DMD).
Reflected light from the DMD then passes through the short throw projection
lens and displays on the external display screen.

NOTE: Refer to Section 3, for a brief description the projector’s main modules.

Ensure you have received the following components with your projector or
display cube:

For RPMX:

For CX50/CX60/CX67:

• Hardware

• Mounting bracket (for lens

vertical configuration)

• Label (for lens vertical

configuration)

• Hardware (for mounting cube-

to-cube and cube-to pedestal)

Each projector/display system is provided with a User’s Kit, which includes
components required in the setup and maintenance of the projector. Ensure you
have received the following components in the User’s Kit:

• User’s Manual

• Installation Guide

• IR remote keypad with 2 AA batteries

• Assorted ball drivers (for adjusting projection lens and adjuster)

• CD (includes test patterns for color matching)

NOTE: Additional User’s Kits can be purchased – reference CHRISTIE #38-
804828-01 for RPMX and #38-804829-02 for CX50/CX60/CX67 when ordering.

1.2

Components