Справочник Пользователя для Epson EB-G6550WU
Submenu
Function
HDBaseT (EB-
G6750WU only)
G6750WU only)
Make settings when the optional HDBaseT Transmitter is
connected to the HDBaseT port.
Control Communications
connected to the HDBaseT port.
Control Communications
: When set to On, Ethernet
communication from the HDBaseT port, serial
communication, and control using the wired remote control
connected to the optional HDBaseT Transmitter are all
enabled. (When this is enabled, the projector's LAN port,
RS-232C port, and Remote port are disabled.)
communication, and control using the wired remote control
connected to the optional HDBaseT Transmitter are all
enabled. (When this is enabled, the projector's LAN port,
RS-232C port, and Remote port are disabled.)
Multi-Projection
Make settings when projecting from multiple projectors.
s
Brightness Level
(not available for EB-G6450WU): When
the brightness of each lamp differs, set the lamp brightness
level between 1 and 5. This item can be adjusted only when
Power Consumption
level between 1 and 5. This item can be adjusted only when
Power Consumption
is set to Normal from the Settings
menu.
Edge Blending
Edge Blending
: Corrects a border between multiple images
to create a seamless screen.
s
Multi-screen
: You can adjust the tint and brightness of each
projected image.
s
Projector ID
: Set the ID from 1 to 9.Off indicates that no
ID is set.
s
Schedule Set-
tings
tings
You can set the projector's schedule so that it performs a
specific operation at a pre-scheduled time.
specific operation at a pre-scheduled time.
s
Language
You can set the language for messages and menus.
Submenu
Function
Reset
You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type
to their default settings. However, the following items are
not reset.
Screen Type
, Screen Position, Projection, Direction, High
Altitude Mode
, Remote Control Type, Inv Direction
Button
, Startup Source Search, Lens Type, A/V Output,
Monitor Out
, Standby Mode, Control Communications,
Multi-screen
, Projector ID, and Language
See the following to return all menu items to their default
settings.
settings.
s
*
When User's Logo Protection is set to On in Password Protection, settings
related to user's logo cannot be changed. You can make changes after setting
User's Logo Protection
related to user's logo cannot be changed. You can make changes after setting
User's Logo Protection
to Off.
s
Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection
is displayed and the network settings cannot be changed. Set Network
Protection
to Off and then configure the network.
List of Functions
89