Справочник Пользователя для Epson EB-G6550WU

Submenu

Function

Administrator
Password

Enter the password for the Administrator Settings menu for
network settings.
You can enter up to 16 single-byte alphanumeric characters. (*
cannot be used.)
If the administrator password is not set, click OK with an empty
password box.

Network Host
Name

This name is used to identify the projector on a network. Use for
Web control, "Connect to a Network Projector" and so on.
When editing, you can enter up to 15 single-byte alphanumeric
characters. (The only symbols you can use are - _. The first
character should be a letter, and the last character should be a
letter or a number.)

PJLink Password

Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)

s

Submenu

Function

Web Control
Password

Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to 8 single-byte
alphanumeric characters. (* cannot be used.) Web Control is a
computer function that allows you to set up and control the
projector by using the Web browser on a computer connected on
a network.

s

Monitor Pass-
word

Set a password to use EasyMP Monitor.
You can enter up to 16 single-byte alphanumeric characters. (*
cannot be used.)

Secure HTTP

To strengthen security, communication between the projector
and computer in Web control is encrypted. When setting
security with Web control, it is recommended to set this to On.

Mail Notification

Goes to the Mail Notification setting menu.

s

Manage Certifi-
cates

Goes to the Manage Certificates settings menu.

s

SNMP

Goes to the SNMP settings menu.

s

Priority Gateway

For the priority gateway, select either Wired or Wireless.

AMX Device Dis-
covery

When you want to allow the projector to be detected by AMX
Device Discovery

, set this to On. Set this to Off if you are not

connected to an environment controlled by a controller from
AMX or AMX Device Discovery.

Crestron Room-
View

Set this to On only when monitoring or controlling the projector
over the network using Crestron RoomView

®

. Otherwise, set

this to Off.

s

Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not available.
• Web control

• Message Broadcasting (EasyMP Monitor plugin)