Справочник Пользователя для Epson EB-Z11000W
Reading error notification emails
When the mail notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The main message
contents are listed below.
• Clean Air Filter
contents are listed below.
• Clean Air Filter
• No Air Filter
• Internal error
• Fan related error
• Sensor error
• Lamp timer failure
• Lamp Warning (1)/Lamp Warning (2)
• Lamp out
• Lamp type mismatch
• Incorrect projection mode
• Internal temperature error
• High-speed cooling in progress
• Lamp replacement notification (1)/Lamp replacement notification (2)
• Low Air Flow
• Low Air Flow Error
• Peltier Device error/ Pump Error
• Shutter Warning
• Shutter Error
• Cinema Filter Warning
• Cinema Filter Error
• No-signal
No image signal is input to the projector. Check the connection status or
check that the power for the signal source is turned on.
check that the power for the signal source is turned on.
• Auto Iris Error
• Power Warning. (Ballast) (1)/Power Warning. (Ballast) (2)
• Power Err. (Ballast)
See the following to deal with problems or warnings.
s
Monitoring and Controlling
188