Справочник Пользователя для Epson EB-1970W
g
Turn off the projector, and then turn it on again to enable the
setting.
setting.
Related Links
Controlling a Networked Projector Using Crestron
RoomView
RoomView
Once you have set up your projector to use Crestron RoomView, you can
control and monitor projection using a compatible Web browser.
control and monitor projection using a compatible Web browser.
a
Start your Web browser on a computer connected to the network.
b
Type the projector's IP address into the browser's address box and
press the computer's Enter key.
press the computer's Enter key.
You see this screen:
c
Select the input source that you want to control in the Sources
List box. You can scroll through available sources using the up
and down arrows in the box.
List box. You can scroll through available sources using the up
and down arrows in the box.
d
To control projection remotely, click the on-screen buttons that
correspond to the projector's remote control buttons. You can
scroll through button options at the bottom of the screen.
correspond to the projector's remote control buttons. You can
scroll through button options at the bottom of the screen.
a
These on-screen buttons do not directly correspond to the
projector's remote control buttons:
• OK acts as the [Enter] button
• Menu displays the projector's menu
projector's remote control buttons:
• OK acts as the [Enter] button
• Menu displays the projector's menu
e
To view information about the projector, click the Info tab.
f
To change the projector, Crestron, and password settings, click the
Tools tab, select settings on the displayed screen, and then click
Send.
Tools tab, select settings on the displayed screen, and then click
Send.
g
When you finish selecting settings, click Exit to exit the program.
Related Links
Crestron RoomView Operation Window
Settings on the operation window let you control the projector and adjust
the projection image.
the projection image.
Crestron RoomView Support
126