Справочник Пользователя для Benq MP670
Operation
42
English
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except POWER.
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except POWER.
1.
Press
/
on the projector or go to the
SYSTEM
SETUP: Basic > Panel Key Lock menu
, and select
On by pressing
/
on the projector or remote
control.
2.
A confirmation message displays. Select Yes to
confirm.
confirm.
To release panel key lock, press and hold
/ for 3
seconds on the projector.
You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key
Lock and press
Lock and press
/
to select Off.
•
Keys on the remote control are still in use when panel key lock is enabled.
•
If you press POWER to turn off the projector without disabling panel key lock, the
projector will still be in locked status the next time it is turned on.
Freezing the image
Press
on the remote control to freeze the image. The word
'FREEZE' will display in the upper left corner of the screen.
To
release the function, press any key on the projector or remote
control.
control.
Even if an image is frozen on the screen, the pictures are running on
the video or other device. If the connected devices have active audio
output, you will still hear the audio even though the image is frozen
on screen.
the video or other device. If the connected devices have active audio
output, you will still hear the audio even though the image is frozen
on screen.
Utilizing FAQ function
The INFORMATION menu contains possible solutions to problems encountered by users
regarding image quality, installation, special feature operation and service information.
regarding image quality, installation, special feature operation and service information.
To get the FAQ information:
1.
Press
/
on the projector or press
MENU/EXIT to open the OSD menu and
press
/
to highlight the
INFORMATION menu.
2.
Press
to
highlight
FAQ-Image and
Installation or FAQ-Features and Service
based on the information you want to know.
based on the information you want to know.
3.
Press MODE/ENTER.
4.
Press
/
to select a problem and press MODE/ENTER for possible solutions.
5.
Press MENU/EXIT to exit the OSD.