Справочник Пользователя для Moxa Technologies AWK-1100
MOXA AirWorks AWK-1100 User’s Manual
Web Console Configuration
3-7
To upgrade the firmware of AWK-1100 by HTTP:
1. Click Browse and then select a correct firmware .bin file. The firmware file path will be
shown in the Firmware file name text box.
2. Click Upgrade to begin the upgrade process.
Backing up and Restoring Configuration Settings by HTTP
To back up the configuration of AWK-1100 by HTTP (i.e., export the configuration to a file)::
1. Click on Back Up
2. You will be prompted to open or save the configuration file. Click on Save.
3. The configuration file is named with the AWK-1100’s MAC address. For example, if the
1. Click on Back Up
2. You will be prompted to open or save the configuration file. Click on Save.
3. The configuration file is named with the AWK-1100’s MAC address. For example, if the
AWK-1100’s MAC address is 00-01-02-33-44-55, the configuration backup file should be
“000102334455.hex”. Don’t change the configuration file name in the Save As dialog box.
Select the folder in which the configuration file is to be stored, and then click on Save.
“000102334455.hex”. Don’t change the configuration file name in the Save As dialog box.
Select the folder in which the configuration file is to be stored, and then click on Save.
NOTE
The procedure may be different for different Web browsers (IE, Netscape, etc.).
To restore the configuration of the AWK-1100 by HTTP (i.e., import the configuration from a
file):
1. Click Browse and then select the correct configuration .hex file. You must make sure the file
file):
1. Click Browse and then select the correct configuration .hex file. You must make sure the file
name is the AWK-1100’s MAC address. The firmware file path will be shown in the
Firmware file name text box.
Firmware file name text box.
2. Click Restore to upload the configuration file to the AWK-1100.
Upgrading Firmware by TFTP
When using TFTP as the firmware management protocol, you can configure settings for the AP’s
TFTP client to communicate with a TFTP server. If the TFTP client does not get a response from
the TFTP server within a period specified by the Timeout setting, it will resend the previous
request. The Max number of retries setting specifies the maximum number of resends before the
TFTP client stops communicating with the TFTP server.
TFTP client to communicate with a TFTP server. If the TFTP client does not get a response from
the TFTP server within a period specified by the Timeout setting, it will resend the previous
request. The Max number of retries setting specifies the maximum number of resends before the
TFTP client stops communicating with the TFTP server.
To upgrade AWK-1100’s firmware by TFTP:
1. Prepare a computer that will be used as a TFTP server and as a managing computer to trigger
1. Prepare a computer that will be used as a TFTP server and as a managing computer to trigger
the upgrade process.
2. Connect the computer and one of the LAN Ethernet switch port with a normal Ethernet cable.