Справочник Пользователя для Moxa Technologies AWK-1100

 

 

With MAC-Address-Based Access Control, you can specify the wireless client computers that 
are permitted or not permitted to associate with the AWK-1100. When the table type is set to 
inclusive, entries in the table are permitted to associate with the AWK-1100. When the table type 
is set to exclusive, entries in the table are not permitted to associate with the AWK-1100. 

To deny access for wireless clients to the wireless network: 

1.  Select Enabled from the Functionality drop-down list. 
2.  Set the Access control type to exclusive. 
3.  Specify the MAC address of a wireless client to be denied access, and then click Add. 
4.  Repeat Steps 3 for other wireless clients. 

To grant access for wireless clients to the wireless network: 

1.  Select Enabled from the Functionality drop-down list. 
2.  Set the Access control type to inclusive. 
3.  Specify the MAC address of a wireless client to be denied access, and then click Add. 
4.  Repeat Steps 3 for other wireless clients. 

To delete an entry in the access control table: 

y

  Click Delete next to the entry. 

NOTE 

The size of the access control table is 64. 

 

Instead of manually entering MAC addresses to the access control table one by one, you can 
prepare a text file that contains all the MAC addresses and put it on a TFTP server, and then 
command the AWK-1100 to download the MAC ACL (Access Control List) file from the TFTP 
server. The following figure shows the contents of a sample ACL file.