Справочник Пользователя для Barco 3G/HD/SD-SD
MatrixPRO-II 3G/HD/SD-SDI Routers
Rev. 1.1
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
13
Field selectivity:
Field 1.
Timing range:
•
SD, PAL: within clock-intervals (27MHz) 565 – 835 line 6
•
SD, NTSC: within clock-intervals (27MHz) 565 – 835 line 10.
•
HD Tri-Level: 1280x720: within clock-intervals (148.5MHz) 455 –
780 line 7
780 line 7
•
HD Tri-Level: 1920x1080: within clock-intervals (148.5MHz) 625 –
1070 line 7.
1070 line 7.
2.5
Connection details
The MatrixPRO-II routers have the following service connections on the rear of each product:
SYNC:
Synchronization signal (in). Black burst/composite/tri-level sync
reference input with passive loop-through for vertical interval
switching.
reference input with passive loop-through for vertical interval
switching.
LOOP:
Synchronization signal (out). Loop-through of SYNC input.
NCB IN/OUT
N/A.
ETHERNET:
10/100Base-T Ethernet bus for external router control.
RS 232:
RS-232 for external control protocols.
POWER A:
±15VDC power connector.
POWER B:
±15VDC power connector, redundant supply.
CONFIGURATION:
Configurations switch. See Chapter 3 for further descriptions.
2.5.1
Power Supply pinout
The DB9 power pinout for MatrixPRO-II routers is as follows;
Pin #
Description
1
GND
2
Not connected
3
Not connected
4
+15VDC
5
Not connected
6
Not connected
7
Not connected
8
-15VDC
9
Not connected