Справочник Пользователя для Barco 3G/HD/SD-SD
MatrixPRO-II 3G/HD/SD-SDI Routers
Rev. 1.1
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
19
3.5
Switching time
Switching is performed according to the detected sync reference signal. Switching time is
determined by the synchronization signal that feeds the router. This is useful when the video
signal has the same format as the synchronization signal. Supported formats are: PAL,
NTSC, 750/50p, 750/60p, 1125/50i and 1125/60i.
determined by the synchronization signal that feeds the router. This is useful when the video
signal has the same format as the synchronization signal. Supported formats are: PAL,
NTSC, 750/50p, 750/60p, 1125/50i and 1125/60i.
3.6
Configuring protocol options
TCP/IP
This is the default option for the Barco MatrixPRO-II HD/3G SDI routers. Selecting this
protocol
protocol
disables the RS-232 port of that device.
RS232
The serial protocol can be selected from the configurator software. Selecting the RS232
protocol
The serial protocol can be selected from the configurator software. Selecting the RS232
protocol
disables the Ethernet port of that device.
Connection to the router will be lost after 20 seconds of inactivity
RS-232 parameters:
-
Bit rate: 19200 bit/s
-
Data bits: 8
-
Stop bits: 1
-
Parity: no parity
Default IP Address: 192.168.0.245 - Port: 4381