Справочник Пользователя для Barco 3G/HD/SD-SD
MatrixPRO-II 3G/HD/SD-SDI Routers
Rev. 1.1
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
22
5.2
Ethernet connection
The connections follow the standard set by the IEEE 802.3 100BaseTX specification. The
cables that are to be applied should be CAT-5 / CAT-5E standard, or better. It is the
responsibility of the installer / user to secure a proper installation of the Ethernet
connection.
cables that are to be applied should be CAT-5 / CAT-5E standard, or better. It is the
responsibility of the installer / user to secure a proper installation of the Ethernet
connection.
All Barco MatrixPRO-II routers and IP-based Control Panels are connected together through
an Ethernet Switch.
an Ethernet Switch.
A Barco MatrixPRO-II device has only one physical Ethernet connection. If redundant control
is required, this limitation has to be solved by the control system.
is required, this limitation has to be solved by the control system.
The default IP address is: 192.168.0.245 port: 4381
Connection to the router will be lost after 20 seconds of inactivity