Справочник Пользователя для ZyXEL Communications P-334W

Prestige 334W User’s Guide 

34-6 

  Firmware and Configuration File Maintenance 

The following table describes some of the fields that you may see in GUI-based TFTP clients. 

Host 

Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address 
when shipped. 

Send/Fetch 

Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your 
computer.  

Local File 

Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom 
extension) on your computer. 

Remote File 

This is the filename on the Prestige. The filename for the firmware is “ras” and for the 
configuration file, is “rom-0”. 

Binary 

Transfer the file in binary mode. 

Abort 

Stop transfer of the file. 

Refer to section 34.2.5 to read about configurations that disallow TFTP and FTP over WAN. 

This section shows you how to restore a previously saved configuration. Note that this function erases the 
current configuration before restoring a previous back up configuration; please do not attempt to restore 
unless you have a backup configuration file stored on disk.   

FTP is the preferred method for restoring your current computer configuration to your Prestige since FTP is 
faster.  Please note that you must wait for the system to automatically restart after the file transfer is 
complete.