Справочник Пользователя для Barco PFWX-51B & PFWU-51B

PFWX-51B/PFWU-51B  10/02/2014  

56

9.Settings 2

Automatically shut off when no signal. (in minutes). If siwitch to 

On

, the projector will automatically shut off after 15 minutes 

when no signal.

Automatically power on when AC power applied.

When the lamp is set to ECO mode, the lamp is running at 280W. If the ambient temperature is higher than 35 degree Celsius, 
lamp will operate at ECO mode. In this case, lamp mode selection is unavailable. Lamp mode selection is available once the 
ambient temperature drops below 35 degree Celsius.

•  ECO 

  When set to Eco mode, the wattage of the lamp will be at 280W. If the surrounding environment is sufficiently dark or if 

you do not require intense brightness, you can set the lamp to Eco mode to prolong its usage life.

•  Normal 

  When set to Normal mode, the wattage of the lamp will be at 370W. If the projection environment requires brighter 

image, you can set the lamp to Normal for the highest projection brightness.

•  POWER 

  When set to Power mode, the wattage of lamp will be at 330W. you can set the lamp to Power mode to prolong its usage 

life.

All settings of the projector will be set to the original factory settings. All user settings are erased with this operation.

This function will not apply to items including no signal, network, Projector control, startup Logo, language, 
High Altitute mode and lamp hours

When Factory Reset is executed, all source memories created by the projector (i.e. timings files) will be  
erased

To show which source is activated

Showing resolution/H, V information at RGB mode. Showing color standard at Video mode.

Lamp hour used information. ECO, Normal and POWER counter are separated.

Showing system software version.

Showing serial number of this projector.