Справочник Пользователя для ASUS DSL-N10

9

Chapter 5: Installing the utilities   

 

 

 

 

 

 

 

 

 

 

DSL-N10

Firmware Restoration is used on an ASUS Wireless ADSL Router that failed during 

its firmware upgrading process. It uploads the firmware that you specify. The 

process takes about three to four minutes.

Note: This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless 

ADSL Router. Normal firmware upgrades must be done through the web interface. Refer to  

Chapter 4: Configuring via the web GUI for more details.

To launch the rescue mode and use the Firmware Restoration utility:
1.  Unplug the wireless router from the power source.
.  Hold the Restore button at the rear panel and simultaneously re-plug the 

wireless router into the power source. Release the Restore button when the 

Power LED at the front panel flashes slowly, which indicates that the wireless 

router is in the rescue mode.

3.  From your computer’s desktop, click Start > All Programs > ASUS Utility > 

DSL-N10 Wireless ADSL Router > Firmware Restoration.

Important: Launch the rescue mode before using the Firmware Restoration utility.

4.  Specify a firmware file, then click Upload.