Справочник Пользователя для Avaya G700
4
Installing a New G700 without an S8300
Administer Communication Manager
Administer Communication Manager
208
Installation and Upgrades for G700 and S8300
December 2003
Media Gateway Screen (After Registration with Primary Controller)
The media modules installed in the G700 are listed next to their slot numbers.
To verify that a G700 Media Gateway has been successfully added:
Verify Changes
1
At the SAT prompt, type
list media-gateway
.
List Media-Gateway Screen
2
Verify that the G700 Media Gateway has registered.
The
y
in the registered field signifies that the G700 Media Gateway has registered. If the G700
should become unregistered, the
y
will become an
n
, but the IP address will remain assigned to
the G700 Media Gateway. If the G700 has never been registered, the IP Address field will be
blank.
blank.
If the G700 fails to register, two common causes might be:
— The serial number added as the identifier for the G700 is wrong. To check, log back into
the G700 gateway and type show system. Check the serial number that appears.
— There is no IP connection between the G700 and the S8300. To check, type
show mgc
and then
ping mgp
<controller_address>
.
change media-gateway 1
Page 1 of 1
MEDIA GATEWAY
Number: 1
IP Address: 135.9.41.150
Type: g700
FW Version/HW Vintage: 21.13.0 /0
Name: Swainsons
MAC Address: 00:04:0d:02:06:ca
Serial No: 012X06230551
Encrypt Link? y
Network Region: 1
Location: 1
Registered? y
Controller IP Address: 135.9.41.146
Site Data:
Slot Module
Type
Name
V1:
S8300
ICC MM
V2:
MM712
DCP MM
V3:
MM711
ANA MM
V4:
MM710
T1/E1 MM
V8:
V9:
V9:
list media-gateway
MEDIA-GATEWAY REPORT
Number
Name
Serial No/
IP Address/
Type NetRgn Reg?
FW Ver/HW Vint
Cntrl IP Addr
1 LabA
01DR07128730
135.177.49.57 g700
1
y
21 .13 .0 /0
135.177.49.59
2 Data
MG2
02DR01130356
135.177.49.90 g350
1
n
11 .2
.0
/0
135.177.49.40