Справочник Пользователя для Vanguard Managed Solutions 7300 Series
Modifying Your Vanguard 7300
5-9
General Card Replacement Guidelines
Figure 5-6. CPU Card Installation Guidelines - 7310 and 7330 Version 2
10/100BaseT
Ethernet PMC
Ethernet PMC
When installing 10/100BaseT Ethernet PMC into a Vanguard 7300 enclosure, follow
these guidelines:
these guidelines:
1) Always install the first 10/100 BaseT Ethernet PMC into the mezzanine slot of
the CPU card.
2) Install subsequent 10/100 BaseT Ethernet PMC into the PMC slots on Carrier
Expansion Cards.
3) Always populate the Carrier Expansion Cards in this order, PMC Slot 1 then
PMC Slot 2. PMC slot 1 is the PMC slot on the right in the Vanguard 7310
Version 1; PMC slot 1 is the lower PMC slot in Vanguard 7330 Version 1.
Version 1; PMC slot 1 is the lower PMC slot in Vanguard 7330 Version 1.
Carrier Expansion
Card for Ethernet
Mezzanine Card
(PMC)
Card for Ethernet
Mezzanine Card
(PMC)
If you are installing the Carrier Expansion card into a Vanguard 7300 enclosure, it is
recommended that you follow these guidelines:
recommended that you follow these guidelines:
1) Always populate the Carrier Expansion card in this order, Mezzanine Slot 1 then
Mezzanine Slot 2.
2) Install the first Carrier Expansion card beside the CPU Card.
3) Install subsequent Carrier Expansion cards in subsequent slots.
T3/E3 ATM Card
If you are installing the T3/E3 ATM Card with the T3/E3 ATM PMC into a Vanguard
7300 enclosure it is recommended that you follow these guidelines:
7300 enclosure it is recommended that you follow these guidelines:
1) Install the T3/E3 ATM PMC onto the Carrier Expansion Card in position 1 only.
2) Install the T3/E3 ATM Card into the slot beside the CPU Card or the first empty
slot after any Carrier Expansion Cards for Ethernet and/or before any T1/E1/PRI
cards.
cards.
3) Install the T3/E3 Rear Transition Module at the same slot location as the ATM
Carrier Expansion Card.