Справочник Пользователя для Netopia CLI 874

The tag (i.e., name) of the DLCI defaults, in this case, to “DLCI 17”. To specify a different name, type:

frame-relay dlci 17 tag "My DLCI"

For descriptions of the other parameters available for configuration (and their default values) see the Motorola 
Netopia

 Router User’s Reference Guide.

no frame-relay dlci number

This command deletes the DLCI identified by number.

frame-relay lmi type { none | annexa | annexd | ansi | ccitt | lmi }
no frame-relay lmi type
show frame-relay lmi type

These commands allow you to change or display the Frame Relay Local Management Inter face (LMI) type. The 
keywords ccitt and annexa are synonyms, as are the keywords ansi and annexd.

frame-relay tim { none | standard | buffered }

This command allows you to set the routers’s Frame Relay transmit injection management tim.

show frame-relay lmi statistics

This command displays Frame Relay Local Management Inter face (LMI) statistics. 

#show frame-relay lmi statistics 

   LMI Tx Status Enquiries:          10 

   LMI Rx Status Responses:          10 

   LMI Timeouts:                      0 

   LMI Errors:                        0 

   LMI Failures:                      0

show frame-relay pvc 

This command displays the status of each Frame Relay permanent vir tual circuit (pvc). 

#show frame-relay pvc 

   DLCI:    16, status: active 

   DLCI:    17, status: active