Справочник Пользователя для Netopia CLI 874

vlan id name name

This command allows you to assign a free-form name name to a VLAN specified by id.

vlan id network { none | lan | eth2 | eth3 | eth4 | eth5 | eth6 | eth7 }

This command allows you to define what additional LAN (ALAN) network is associated with the VLAN specified 
by id.

vlan id id { 1 .. 4094 }

This command allows you to change the VLAN ID, which will effectively require you to refer to the VLAN by its 
new VID after issuing this command.

Beginning with Firmware Version 8.7, a VID of zero (0) is permitted on the Ethernet WAN por t only.

vlan id 8021x authprofile { authprofile tag name | authprofile id }

This command allows you to enable 802.1x authentication for the VLAN specified by id. This option is only 
suppor ted on Router models with VGx technology or single Ethernet por t models. If you are configuring a VLAN 
for a Motorola Netopia

®

 Router model with VGx technology (wired or wireless), you can specify a RADIUS ser ver 

authentication profile for user authentication. This command allows you to associate a VLAN with an 802.1x 
RADIUS authentication profile. You must  create an authentication profile, if you have not already done so. See 

Note:

If you enable 802.1x for a VLAN that includes a wireless SSID, you must set wireless privacy to 

WPA-802.1x as well. See 

. If multiple SSIDs are 

split across several VLANs, the VLANs must either:
• all have 802.1x enabled with WPA-802.1x enabled in Wireless Privacy, or 
• have the VLANs set to 802.1x disabled and wireless privacy set to some other privacy setting. In that case 
wireless privacy can be any setting.
Wireless does not currently suppor t separate privacy modes per SSID. When enabling WPA-802.1x, wireless will 
default to the RADIUS configuration (see 

), unless it is par t of a VLAN. If it is par t of a VLAN it will use the VLAN authentication profile's 

specified RADIUS ser ver.

vlan id interface eth { 1 | 2 | 0/1  | 0/...n } tag { yes | no }
           [ tos-priority { off | on -} ]
           [ iptos-promote { off | on } ]
           [ authprofile { name | id } ]
           [ inter-vlan-routing { group-1... group-8 } enable { yes | no } ]
no vlan id interface eth { 1 | 2 | 0/1 | 0/...n }

These commands allow you to create or delete a VLAN specified by id on an Ethernet inter face indicated by its 
inter face number. The option eth 1 = Ethernet LAN; eth 2 = Ethernet WAN, where applicable. If the Motorola 
Netopia

®

 Router model is a non-VGx model, the only available Ethernet por t is numbered 0/1; for multiple 

managed-switch VGx models the number n is the number of the physical Ethernet por t.

■

tos-priority - allows you to enable or disable packet prioritization based on any 802.1p priority bits in the 
VLAN header to prioritize packets within the Router’s internal queues, according to DiffSer v priority