Справочник Пользователя для Huawei MC509
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Basic Configuration Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
AT+CGSN
81042940
OK
A/
81042940
OK
2.10 +CMEE–Command for Setting the Error Report
Format
Format
2.10.1 Syntax
Command
Possible Response(s)
+CMEE=<n>
<CR><LF>OK<CR><LF>
+CMEE?
<CR><LF>+CMEE:<n><CR><LF>
<CR><LF>OK<CR><LF>
+CMEE=?
<CR><LF>+CMEE:(supported <n> list) <CR><LF>
<CR><LF>OK<CR><LF>
2.10.2 Interface Description
This command sets whether the returned value uses "+CME ERROR:<err>" to
indicate an error related to the MT. If the returned value uses "+CME ERROR:<err>"
to indicate an error related to the MT, the error related to the MT generates "+CME
ERROR:<err>" to replace "ERROR". When the error cause is unrelated to the MT,
"ERROR" is returned.
indicate an error related to the MT. If the returned value uses "+CME ERROR:<err>"
to indicate an error related to the MT, the error related to the MT generates "+CME
ERROR:<err>" to replace "ERROR". When the error cause is unrelated to the MT,
"ERROR" is returned.
2.10.3 Parameter Description
<n>:
0: The returned value of "+CME ERROR:<err>" is not used, and only "ERROR" is
returned in the case of an error.
returned in the case of an error.
1: The returned value of "+CME ERROR:<err>" is used, and <err> uses the number
value of the error.
value of the error.
2: The returned value of "+CME ERROR:<err>" is used, and <err> uses the detailed
string value of the error (default value after startup).
string value of the error (default value after startup).
After restart, the value of <n> is 2.