Справочник Пользователя для Huawei MC509
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
SMS Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94
8.8 ^HSMSSS–Command for Setting Short Message
Parameters
Parameters
8.8.1 Syntax
Command
Possible Response(s)
^HSMSSS=<ack>,<prt>,
<fmt>,<prv>
<fmt>,<prv>
<CR><LF>OK<CR><LF>
In case of an SMS-related error:
<CR><LF>+CMS ERROR:<err><CR><LF>
^HSMSSS?
<CR><LF>^HSMSSS:<ack>,<prt>,<fmt>,<prv><CR><L
F>
F>
<CR><LF>OK<CR><LF>
^HSMSSS=?
<CR><LF>^HSMSSS:(supported <ack> list),(supported
<prt> list),(supported <fmt> list),(supported <prv>
list)<CR><LF>
<prt> list),(supported <fmt> list),(supported <prv>
list)<CR><LF>
<CR><LF>OK<CR><LF>
8.8.2 Interface Description
The set command sets parameters for sending short messages, including whether to
acknowledge, priority, encoding format, and confidentiality.
acknowledge, priority, encoding format, and confidentiality.
NOTE
This AT command is only effective in text mode.
8.8.3 Parameter Description
<ack>: Specifies whether a short message status report is required. The values are
as follows:
as follows:
0: The short message status report is not required (default value after startup).
1: The short message status report is required.
<prt>: Specifies the priority of a short message. The values are as follows:
0: normal (default value after startup)
1: interactive
2: urgent
3: emergency